Backing & Docking Big Trucks

Backing is one of the most common causes of truck crashes and damage, and backing over a person is one of the most tragic. Most backing incidents happen at low speed in places the driver knows, like docks, yards and jobsites. Slow down, look, and get help.

Sight-side (driver’s side) backing into a dock compared with blind-side backing.
Sight-side backing compared with blind-side backing (view from above)

Avoid backing when you can

Before backing

  1. GOAL: Get Out And Look. Check the space, overhead clearances, poles, posts, people, vehicles and anything low that won’t show in mirrors.
  2. Look again if you’ve waited or the situation changed.
  3. Set up so you can back on the sight side (driver’s side) where you can see the trailer best.
  4. Roll down the windows, turn off the radio and turn on the four-way flashers.
  5. Use a spotter if one is available, and agree on signals first. See Backing & Spotters.

While backing

At the dock

Early departures kill. When a truck pulls away while a forklift is entering the trailer, the forklift can fall between the dock and the trailer. Never move your truck until the warehouse confirms loading is complete. See Warehouse Safety.

Where to wait

Many warehouses have driver waiting areas or require you to stay in the cab. Don’t wander onto the dock where forklifts are working. If you must be on the dock, wear hi-vis and stay in marked walkways. See Forklifts.

Standards & references

  • Your state’s CDL manual: Backing section
  • 29 CFR 1910.178(k): Trucks and railroad cars at docks

Last updated: